You should follow a furnace inspection checklist to keep your furnace operating efficiently and safely. This article provides tips and guidelines for a thorough furnace inspection in Calgary. These include checking the blower motor, electrical system, condensate drain, and airflow. It also explains why a furnace inspection is essential before costly repairs occur. Follow the tips if you’re considering hiring a contractor to fix your furnace. You’ll be happy you did!
Checking the blower motor
You should include checking the blower motor on a furnace inspection checklist. The motor controls the level of heated air pushed through the ducts. You can check to see if it has too much vibration or loose electrical parts. It would be best if you also inspected the blower wheel for debris. Checking the blower motor is essential to the furnace inspection checklist because it can cause dangerous carbon monoxide leaks.
Checking the electrical system
In addition to the physical components of the furnace, electrical safety and maintenance should be an integral part of your home furnace inspection. The electrical system includes electrical panels, wiring, and receptacles. You should also look for warning lights, check wiring connections and cables, and check for visible burning and arcing. You should check these items regularly, as they are often overlooked but are just as important as the physical aspects of the furnace.
Checking the condensate drain
One item you should check during a furnace inspection is the condensate drain behind the furnace’s removable access panel. If you notice any standing water, clean it using a wet/dry shop vac. Otherwise, use a bucket and water to remove clogs from the drain. If necessary, contact a professional HVAC technician to perform this service.
Checking the airflow
You can avoid paying a high energy bill by checking the airflow during a furnace inspection. Poor airflow could result from an improperly sized air duct, leaky furnace, or a dirty air filter. HVAC technicians will check the ductwork for damage and assess your furnace filter, grilles, registers, and damper direction. The HVAC technician will use this information to determine the cause of poor airflow and provide solutions for your furnace.
Checking the refrigerant charge
If you have a dual-purpose heating and air conditioning system, you may need to check the system’s refrigerant charge at least twice a year. During these inspections, you should check the pilot tube and igniter for proper function and voltage. Your inspector should also test the thermostat and any leaks. Checking the refrigerant charge is essential to a comprehensive furnace inspection checklist.